CUSTOM ORDERS AVAILABLE!

Here is our custom design product.


CONTACT US IF YOU NEED HELP WITH ORDERING OUR ITEMS OR IF YOU WANT TO MAKE YOUR OWN DESIGN!

CONTACT US

Cornhole Board Wraps

The board wraps are one size - 25" x 49" (1” larger than boards to make the installation process easier) and the hole is not pre-cut, so you will have to cut it by yourself after you install it. Application of the wraps is easy and pretty fast. You just need to follow the instruction that is attached to every order and can be viewed below, under the whole product description.

We sell only set of wraps (so 2 separate decals). Boards, bags, etc are not included. Our designs are laminated!

Our Graphics are digitally printed at the highest resolution possible on professional, high quality vinyls, with use of eco-solvent inks that give an impressive HD look and vibrant, long lasting colors. This wrap film has a removable, repositionable, adhesive technology with special air channels. That technology helps to eliminate bubbles during and after installation. Before we send decals to you, we always laminate them to make them stronger and to protect them from scratches and add an extra vitality. Other advantages of a lamination: it offers better UV protection against color fading and it makes the decal more resistant to smaller damages. Laminate that we use is clear and matte so graphics doesn’t lose its quality and look.

We advise you to preheat a little the board right before application (use a hair dryer or heat-gun). Also, make sure that you install the wrap in a warm place (a room temperature) and leave it, when it is ready, in the same temperature for next couple of hours (or just all night).

All wraps must be applied to a clean and smooth surface. Make sure that the surface on which you are going to install the wrap is dry, plain and sleek (it will not stick properly to rugged or scabrous surfaces – e.g. not lacquered wood). Use a soft rubber or felt tipped squeegee to apply the wrap to the board (do not use a hard plastic squeegee!) Don’t use soap or water to install the graphic. Once the installation process is complete, you should not be able to see any bubbles. Remember not to stretch the vinyl – it will destroy the graphic!

If you need a custom design or want to mix designs from different listings that we have, feel free to order custom wrap product you can find on this page, make your note with instructions at the checkout, or contact us regarding details. We can customize decals so you can fully enjoy them! If you have your own graphics and you want to put it in the boards (or pickup tailgates and rear windows) – let us know! Our team of designers can help you out and cooperate with your specific needs to create a personal and unique design!



We do not give a warranty or do not replace any of our items due to improper installation or care. If you have an issue with any of our items after receiving them, please contact us immediately. If you will not inform us about the problem, issues that may arise after or during installation, will be the responsibility of the person doing all the work.

*Peeled off prints are not returnable.

CORNHOLE WRAPS


The board wraps are one size - 25" x 49" (1” larger than boards to make the installation process easier) and the hole is not pre-cut, so you will have to cut it by yourself after you install it.

Application of the wraps is easy and pretty fast. You just need to follow the instruction that is attached to every order and can be viewed below, under the whole product description.

We sell only set of wraps (so 2 separate decals). Boards, bags, etc are not included. Our designs are laminated!

Scroll down for more information.


 

CUSTOM ORDERS AVAILABLE!

Here is our custom design product.

CONTACT US IF YOU NEED HELP WITH ORDERING OUR ITEMS OR IF YOU WANT TO MAKE YOUR OWN DESIGN!

SEND US A MESSAGE

 
Our Graphics are digitally printed at the highest resolution possible on professional, high quality vinyls, with use of eco-solvent inks that give an impressive HD look and vibrant, long lasting colors. This wrap film has a removable, repositionable, adhesive technology with special air channels. That technology helps to eliminate bubbles during and after installation. Before we send decals to you, we always laminate them to make them stronger and to protect them from scratches and add an extra vitality. Other advantages of a lamination: it offers better UV protection against color fading and it makes the decal more resistant to smaller damages. Laminate that we use is clear and matte so graphics doesn’t lose its quality and look.

We advise you to preheat a little the board right before application (use a hair dryer or heat-gun). Also, make sure that you install the wrap in a warm place (a room temperature) and leave it, when it is ready, in the same temperature for next couple of hours (or just all night).

All wraps must be applied to a clean and smooth surface. Make sure that the surface on which you are going to install the wrap is dry, plain and sleek (it will not stick properly to rugged or scabrous surfaces – e.g. not lacquered wood). Use a soft rubber or felt tipped squeegee to apply the wrap to the board (do not use a hard plastic squeegee!) Don’t use soap or water to install the graphic. Once the installation process is complete, you should not be able to see any bubbles. Remember not to stretch the vinyl – it will destroy the graphic!

If you need a custom design or want to mix designs from different listings that we have, feel free to contact us. We can customize decals so you can fully enjoy them! We accept special orders! If you have your own graphics and you want to put it in the boards (or pickup tailgates and rear windows) – let us know! Our team of designers can help you out and cooperate with your specific needs to create a personal and unique design!

We do not give a warranty or do not replace any of our items due to improper installation or care. If you have an issue with any of our items after receiving them, please contact us immediately. If you will not inform us about the problem, issues that may arise after or during installation, will be the responsibility of the person doing all the work.

*Peeled off prints are not returnable.

FAMILIARIZE YOURSELF WITH OUR INSTALLATION INSTRUCTION AND PREPARE ALL NEEDED SUPPLIES!


VIEW INSTRUCTION

FAMILIARIZE YOURSELF WITH OUR INSTALLATION ISTRUCTION AND PREPARE ALL NEEDED SUPPLIES!

VIEW INSTRUCTION

CHECK ON FACEBOOK